EPSON — Ionizer/Foreign Substance Detection Roller

L-6534VW Operation Guide Maintenance c Important: As well as during periodic maintenance, you should clean the ionizer if the total printing time for one week exceeds 15 hours, or the total amount of printing exceeds 13,500 m. When the static discharge effect of the ionizer declines, ink might drip onto the substrate or the drum. If the needles on the ionizer are still dirty even after cleaning in periodic maintenance, an error caused by an unexpected electrical discharge may occur. See the following for more details on cleaning when you encounter an error.

U “Cleaning the ionizer when an error occurs” on page 294 A Release the nip levers in three positions (a), (b), and (c), and then open nip rollers A and B, and the foreign substance detection roller. B Open the unwinder roll cover on the press. C Clean the top of the unwinder axis for the ionizer. When using a model that does not have an ionizer above the unwinder axis, go to step 5. Remove paper powder, dust, and so on from the needle section with a dry nylon brush. 287