EPSON — Drum

L-6534VW Operation Guide Maintenance G Clean the ionizer's needle and the parts around where the needle is attached with a cleaning stick. Clean the ionizer's needle and the parts around where the needle is attached from the opposite direction. H Use a dry cleaning stick to wipe off any alcohol for cleaning the rollers that remains on the parts you cleaned. c Important: Do not leave any parts wet with alcohol for cleaning the rollers. I Replace the ionizer. Be careful not to catch the cables when you insert the ionizer back into the press, align the screw holes on the left and right and set it in place. J Secure the ionizer with the screws on the left and right.

K Close the top front cover on the press. L Press Finished to exit Periodic Maintenance mode. Drum If you are performing this procedure after cleaning the foreign substance detection roller or the ionizer, go to step 2. 299