L-6534VW Operation Guide Maintenance A Release the nip levers in three positions (a), (b), and (c), and then open nip rollers A and B, and the foreign substance detection roller. B Slacken the substrate that is wound around the drum. C Clean the drum. Dampen the polyester/nylon knit woven fabric with the alcohol for cleaning the rollers, and then wipe off any paper powder, dust, glue, and so on. Caution: Do not touch the light shield at the back of the drum. Note: Paper powder and glue are particularly likely to accumulate in areas that touch the edges of the substrate. Make sure you clean the areas around the edges of the substrate. 300