EPSON — Drum

L-6534VW Operation Guide Maintenance D Visually inspect he drum for any ink residue. If there is ink residue, remove it with adhesive tape and so on. If a lot of ink residue has accumulated, remove the ink deposits with a spatula. Clean until the residue is nearly all removed. E Repeat steps 3 and 4 until the drum is clean. Check the entire circumference of the drum. F Check that the cleaned drum is not damp. If the drum is damp, wipe the entire drum circumference with the dry polyester/nylon knit woven fabric. G Clean the top surface of the front of the drum.

Dampen the polyester/nylon knit woven fabric with the alcohol for cleaning the rollers, and then wipe off any paper powder, dust, and so on. H Check that there are no tools or jigs left inside the press. c Important: Do not leave any foreign substances inside the press. Print quality may decline, or the head could break down. You need to replace the head if it breaks down. I Remove slack from the substrate. Make sure that the substrate wound around the drum is at the center of the drum. 301