L-6534VW Operation Guide Maintenance J Return the three nip levers, and then set nip rollers A and B, and the foreign substance detection roller. If you are going to clean curing unit 3 next, go to the appropriate item without returning the nip levers. U “Curing unit 3” on page 302 K Close the top front cover on the press. L Add a check mark to the item you have inspected, and then go to the next item for inspection. When you have finished the inspection, press Finished . This completes this section. Curing unit 3 If ink deposits accumulate on the light emitting glass for the curing unit, it could have an adverse effect on the printing results. Note:
As well as during periodic maintenance, you should clean the curing unit and the pinning if you notice the print surface is blurred or unexpected patterns appear. A Clean the top surface of curing unit 3. Dampen the polyester/nylon knit woven fabric with the alcohol for cleaning the rollers, and then wipe off any paper powder, dust, and so on. 302