EPSON — Rewinder side rollers

L-6534VW Operation Guide Maintenance G Return curing unit 3 to its position on the left, and then turn the lock lever for curing unit 3 up to secure it in place. If you are going to clean the rewinder side rollers next, go to the appropriate item without returning curing unit 3. U “Rewinder side rollers” on page 306 H Check that there are no tools or jigs left inside the press. c Important: Do not leave any foreign substances inside the press. Print quality may decline, or the head could break down. You need to replace the head if it breaks down.

I When nip rollers A and B and the foreign substance detection roller are released, remove the slack from the substrate, and then return the three nip levers to set nip rollers A and B and the foreign substance detection roller. J Close the top front cover on the press. K Add a check mark to the item you have inspected, and then go to the next item for inspection. When you have finished the inspection, press Finished . This completes this section. Rewinder side rollers If you are performing this procedure after cleaning curing unit 3, go to step 3. 306