EPSON — Rewinder side rollers

L-6534VW Operation Guide Maintenance A Release the nip levers in three positions (a), (b), and (c), and then open nip rollers A and B, and the foreign substance detection roller. B Open the lock lever on curing unit 3 by turning it to the right, and then slide curing unit 3 to the right. C Open the rewinder roll cover on the press. D Clean the rewinder side rollers. Dampen the polyester/nylon knit woven fabric with the alcohol for cleaning the rollers, and then wipe off any paper powder, dust, glue, and so on. When substrate is loaded, lift it up a little and wipe underneath. Clean roller (12) and the lower of the two nip rollers B from the bottom.

If drive roller B (11) is very dirty, remove nip roller B and then clean. Follow steps 5 to 10. 307