L-6534VW Operation Guide Maintenance If the interior of the additional UV lamp curing unit or substrate path channel is soiled or in an abnormal condition, it could have an adverse effect on the printing results. c Important: ❏ When cleaning the surface of the roller, do not use hard materials such as tools. If the roller is damaged, the substrate may not be fed to the correct position, and color irregularities could be caused. ❏ Check that each section is not damaged or worn out. If anything is damaged or worn out, contact service support. Rewinder side workbench c Important: When using substrate to which glue sticks easily, perform additional inspections and cleaning between print jobs.
A Clean the workbench. Dampen the polyester/nylon knit woven fabric with the alcohol for cleaning the rollers, and then wipe off any paper powder, dust, glue, and so on. When substrate is loaded, lift it up a little and wipe underneath. B Check that the cleaned workbench is not damp. C Remove slack from the substrate. D Add a check mark to the item you have inspected, and then go to the next item for inspection. When you have finished the inspection, press Finished . This completes this section. 319