L-6534VW Operation Guide Maintenance Additional UV lamp curing unit irradiation part/Silica glass base/Scraps of paper check If you are performing this procedure when replacing the substrate, make sure that the device has stopped before you continue. If you are performing this procedure the additional UV lamp curing unit rollers, go to step 4. A Open the cover at the bottom of the additional UV lamp curing unit, and then open the additional UV lamp curing unit lamp cover. B Check the additional UV lamp curing unit upper section. If it is dusty or dirty, wipe it with the polyester/nylon knit woven fabric dampened with the alcohol for cleaning the rollers. 320