L-6534VW Operation Guide Maintenance C Raise the additional UV lamp curing unit. D Clean the irradiated part with UV and the base of additional UV lamp curing unit. Make sure there are no scraps of paper in the irradiated part with UV and the base of additional UV lamp curing unit. When substrate is loaded, lift it up a little and check underneath. E Check the glass surface. If it is dirty, wipe it with the polyester/nylon knit woven fabric dampened with the alcohol for cleaning the rollers. F Check that the cleaned glass surface is not damp. If any of the alcohol for cleaning the rollers remains, wait until it is dry. 321