L-6534VW Operation Guide Maintenance G Lower the additional UV lamp curing unit. If you are going to clean the additional UV lamp curing unit rollers next, go to the appropriate item without lowering the additional UV lamp curing unit. U “Additional UV lamp curing unit rollers” on page 322 H Remove slack from the substrate. I Close the additional UV lamp curing unit lamp cover, and then close the cover at the bottom of the additional UV lamp curing unit. J Add a check mark to the item you have inspected, and then go to the next item for inspection. When you have finished the inspection, press Finished . This completes this section.
Additional UV lamp curing unit rollers If you are performing this procedure after cleaning the additional UV lamp curing unit irradiation part/silica glass base, go to step 3. A Open the cover at the bottom of the additional UV lamp curing unit, and then open the additional UV lamp curing unit lamp cover. 322