L-6534VW Operation Guide Maintenance c Important: Be careful not to touch the nozzle surface on the head. Otherwise, the head may break down. You need to replace the head if it breaks down. C Wipe the light shield bars, pinning covers (b), and curing units (c) with the polyester/nylon knit woven fabric dampened with the liquid for ink cleaning. D Wipe the light shield bars, pinning covers and the curing unit covers that you cleaned with the dry polyester/nylon knit woven fabric. E Close the top rear cover, the left rear cover, and the right rear cover on the press.
When cleaning the head sides next, continue to the next item without closing the top rear cover, the left rear cover, and the right rear cover. U “Head sides” on page 351 F Add a check mark to the item you have inspected, and then go to the next item for inspection. When you have finished the inspection, press Finished . This completes this section. Head sides When ink accumulates on the head sides, Auto Head Maintenance may malfunction, or it could have an adverse effect on the printing results. c Important: As well as during periodic maintenance, you should clean the head sides if Auto Head Maintenance malfunctions. 351