L-6534VW Operation Guide Maintenance If you are performing this procedure after cleaning the light shield bars, go to step 2. A Open the top rear cover, the left rear cover, and the right rear cover on the press. B Clean the head sides (for each color). Caution: Do not touch the light shield at the back of the carriage unit. Dampen the polyester/nylon knit woven fabric with the cleaning liquid for ink cleaning, and then wipe off any ink deposits from the head sides. Wipe both of the long sides of the print head back and fourth twice each. Change the polyester/nylon knit woven fabric for each color so that the colors do not mix.
Repeat cleaning until you cannot feel any foreign substances on the surface. c Important: ❏ Be careful not to touch the nozzle surface on the head. Otherwise, the head may break down. You need to replace the head if it breaks down. ❏ Do not perform operations directly below the head. Ink could drop into the press. 352