EPSON — Head nozzle surface

L-6534VW Operation Guide Maintenance C Close the top rear cover, the left rear cover, and the right rear cover on the press. When cleaning the head nozzle surface next, continue without closing the top rear cover, the left rear cover, and the right rear cover on the press. U “Head nozzle surface” on page 353 D Add a check mark to the item you have inspected, and then go to the next item for inspection. When you have finished the inspection, press Finished . This completes this section. Head nozzle surface When ink accumulates on the head nozzle surface, Auto Head Maintenance may malfunction, or it could have an adverse effect on the printing results.

Clean the head nozzle surface in the following situations. ❏ The cleaning items for Head nozzle surface are enabled at the beginning of work or the end of work. ❏ Except for the beginning of work or the end of work, a message id displayed prompting you to clean the head nozzle surface. c Important: ❏ If Auto Head Maintenance fails, clean the head nozzle surface. ❏ When cleaning the head nozzle surface, make sure to use the cleaning jig for the head nozzle surface. Note: ❏ We recommend using the remaining time displayed in the notification as a guide, and cleaning before the time runs out. ❏ If the nozzles are still clogged, also perform Power Cleaning.

U “Clean the Heads Individually” on page 154 353