EPSON — If the press stops due to an emergency stop or power failure

L-6534VW Operation Guide Troubleshooting D Check the cause of the emergency stop, and resolve the situation. Caution: Do not move the carriage unit by hand. If the carriage unit is moved by hand, the head may touch the light shield causing the head to breakdown. c Important: ❏ If the head is on the drum, place the magnetic bars on the unwinder side and on the rewinder side workbench, and then pull the substrate on both sides to make sure the substrate on the drum does not touch the head. ❏ When opening the rear cover, make sure the light shield curtain is installed. ❏ When opening the front cover, make sure you perform operations as quickly as possible.

E Turn OFF the breaker and wait for at least 10 seconds, and then turn ON the breaker and set the switch on the press to Standby . The press restarts. c Important: If an error occurs that prevents safe usage, the press stops again. If it stops again, contact service support. F When the substrate on the drum has ink which has not been cured during printing, perform Cure Ink . (1) Press Maintenance from the menu on the left. 364