EPSON — Solutions After Stopping Due to an Error

L-6534VW Operation Guide Troubleshooting D Open the top front cover on the press, and check the status of the foreign substances and the prints. Check the following points. ❏ The substrate on the drum is printed. ❏ There are no wrinkles in the substrate between nip roller A and the drum. ❏ There are no scraps of paper or cured ink between the foreign substance detection roller and curing unit 1, or the substrate is not curled. E When the substrate on the drum has ink which has not been cured during printing, go to step 6. If it does not have uncured ink, go to step 7. F Perform Cure Ink . (1) Press Finished . (2) Press Maintenance , and then press Detailed Settings - Cure Ink .

Perform Cure Ink. 383