L-6534VW Operation Guide Troubleshooting (3) Press Maintenance and then press Periodic Maintenance . (4) Press Switch Mode , and then switch the inspection mode to Feed section . G Release nip rollers A and B, and then remove any foreign substances. Loosen the tension in the substrate on the unwinder side and the rewinder side as necessary so that the drum and the substrate can be moved. 384 Point of Occurrence Type of Foreign Substance Solution On the drum Scraps of paper, glue, and so on Clean the drum. U “Drum” on page 299 Cured ink Curled paper edges Finish the inspection there, and feed the curled area to the rewinder side.