EPSON — How do I print label designs with a pitch (interval) of less than 30 mm?

L-6534VW Operation Guide FAQ Eye mark for additional printing Change the pitch of the eye mark arrangement for base printing according to the substrate width. Also, make sure you set the value for the changed eye mark pitch in the Eye Mark Pitch for print information. How do I print label designs with a pitch (interval) of less than 30 mm? A. Arrange the label design so that the print length of one page is 30 mm or more. Also, if you need eye marks for each label design, make sure they are arranged separately from the eye marks for the press. This press can print lengths of 30 to 1,000 mm on one page.

When printing a label design with a pitch (interval) of less than 30 mm, or when there are multiple label designs in the print data, make sure the print length of one page is 30 mm or more. Example) When the pitch interval between label designs is 10 mm Label design Print data 412 Substrate width Minimum page length for print data 120 mm or more 30 mm Less than 120 mm 60 mm Substrate width Minimum eye mark pitch 200 mm or more 30 mm 150 mm or more, less than 200 mm 50 mm 120 mm or more, less than 150 mm 90 mm Less than 120 mm 150 mm