EPSON — When Telescoping Occurs in the Substrate

L-6534VW Operation Guide FAQ When eye marks are necessary for the label designs The smallest eye mark pitch for which you can use additional printing and the reverse feeding function on this press is 30 mm. When you need to use an eye mark pitch (interval) that is less than 30 mm, make sure they are arranged separately from the eye marks for the press. When you need a pitch interval of 10 mm for eye marks for post processing devices ❏ Arrange one eye mark for the press at the top of the print data (pitch interval 30 mm) ❏ Arrange eye marks for the post processing device for each label design (pitch interval 10 mm) Print data When Telescoping Occurs in the Substrate A.

1 When unwinding or rewinding substrate with a tension that is not suitable to that substrate, telescoping may occur. "Telescoping" refers to a phenomenon that the center of a substrate roll projects out creating a shape similar to a bamboo shoot. When you select Substrate Type , the standard tension value is applied; see the following tables to change the tension value if any problems occur. 413 Point where telescoping occurs What to do Unwinder roll side ❏ Lower the tension value for unwinding by 0.7 times the standard value. ❏ Film that is 250 mm or wider wrinkles easily. We recommend setting 15 N or more.

Rewinder roll side When telescoping of 10 mm or more occurs, lower the tension value for rewinding by 0.7 times the standard value. When removing wound up roll substrate ❏ Increase the tension value for rewinding by 1.3 times the standard value. ❏ Since telescoping occurs easily in film that is 120 mm or narrower, be careful when removing from the rewinder axis.