EPSON — When performing additional printing, the print position gradually shifts

L-6534VW Operation Guide FAQ Changing the tension value ❏ When replacing the substrate Change the tension setting in the Substrate Settings menu - Change Substrate step 2. ❏ After changing the substrate Change the tension setting in the Substrate Settings menu - Change settings screen. A. 2 When the label design arrangement is unbalanced, telescoping may occur due to the thickness of ink. "Telescoping" refers to a phenomenon that the center of a substrate roll projects out creating a shape similar to a bamboo shoot. Perform the following action. When performing additional printing, the print position gradually shifts A.

When using substrate that easily expands or contracts, the print position gradually shifts as the drum temperature rises. Adjust Align eye mark temp correction factor. Adjust the eye mark alignment temperature correction factor using the drum temperature (˚C) and the amount of shift (mm) in the print position. A Press the Pause switch on the press to pause printing, and then cancel the job. B Check the current drum temperature on the Operation Status screen. 414 Point where telescoping occurs What to do Rewinder roll side Make the label design on the substrate balanced. This makes the thickness of ink on the substrate even, and prevents the telescoping.