L-6534VW Operation Guide FAQ ❏ Cleaning the ionizer U “Cleaning the ionizer when an error occurs” on page 294 ❏ Adjusting the ion balance U “Start Printing” on page 134 step 6 A.2 Making the print speed slower may be able to reduce the charge amount of the substrate. If the error remains even after cleaning the ionizer or adjusting the ion balance, make Print Speed in Preset for Printing slower than the current print speed, and try printing. This may increase the discharge capacity of the substrate, which may resolve the error. Gaps or boundary lines of another color appear between an object and its background A. Perform a trapping process on the target object.
You may be able to reduce the appearance of gaps or boundary lines of another color by modifying the print data following the procedure below. A Open the print data to be displayed in Adobe Illustrator. B Select the object on which gaps or boundary lines of another color appear. C In the Color panel, specify the stroke color. If the color of the selected object is darker, specify the color of the adjacent object as the stroke color. If the color of the selected object is lighter, specify the color of the selected object as the stroke color. For example, in the diagram below, specify red in the background. 420