L-6534VW Operation Guide Overview of the Product 48 Item Explanation Banner Printing Set this when printing multiple-page print jobs continuously without gaps. When us‐ ing continuous image data, the finished job will look like one continuous image. The print speed is 15 m/min (High density). U “Printing Multiple Pages Data without Gaps (Banner Printing)” on page 193 Do Not Apply (default) Banner printing is not performed. Apply Banner printing is performed. Create print data at the same page size. Print Method For Reverse White Jobs Set to print using the reverse white printing method. Color Plate Printing (default) Prints only the color layer of the print data.
White Plate Printing Prints only the white layer of the print data. Rotate 180 Degrees Rotates the print data 180 degrees. Do Not Apply (default) The print data is not rotated 180 degrees. Apply The print data is rotated 180 degrees. Print Speed Set the Print Speed. Some speed options may not be available or disabled depending on the settings in preset. U “Selecting the Print Speed” on page 158 50 m/min (Productivity) Print speed when productivity is focused on. 30 m/min (Standard) (default) Standard print speed. 15 m/min (High density) ❏ Print speed when Wh or Dv ink is used.
This is suitable when performing white printing with high shielding ability, or highly decorative printing with Dv ink. ❏ Select this when focusing on the compatibility with L-6034VW. 7.6 m/min (Reverse White) Print speed for white printing over color printing (re‐ verse white printing). Pinning UV Light Strength Set this when emitting UV from the pinning. Usually, leave Standard as it is. Standard (default) Emitting UV from the pinning increases the print quality by controlling curing of ink. Off When you select Off, the interval of the Auto Head Main‐ tenance is longer than the interval when Standard is se‐ lected. This reduces the amount of ink used in Head Maintenance.
Note that the image quality may decrease. Cannot print jobs containing white layers. If you are using a Dv-ink model, Off is not available when 50 m/min (Productivity) is selected as the Print Speed.