L-6534VW Operation Guide Overview of the Product 49 Item Explanation Density Control Adjusts the density of a printout. Set the value within a range of 1 to 400. Decrease the value to make the colors lighter. Increase the value to make the colors darker. Increase or decrease the value for each color to change the color tone. In areas where you have set the amount of ink to 100% in the print data, the density increases if you set the value within a range of 100 to 150%. For white printing, the shielding ability will be improved. However, the density does not change if you set the value to more than 150%. This function is not available for some print applications. Default value:
100% Nozzle Overlap Sets the nozzle control method used for stitching where the heads overlap. Change this setting according to the condition of the streaks when attempting to re‐ duce streaks that appear at regular intervals in the feeding direction. This may be disabled depending on the print application software. U “Streaks at Regular Intervals in the Print Result” on page 386 Standard (default) Reduces streaks by adjusting the shades of the colors. Customized Reduces streaks by adjusting the number of nozzles used and the color density. (Subs) Head Stitch Density Adjustment/(Wh) Head Stitch Density Adjustment This is available when Nozzle Overlap is set to Standard.
Reduces streaks that appear at regular intervals in the feeding direction. Set All Colors: Adjusts all colors to 5 levels at the same time. Set Each Color: Adjusts each color individually if there are streaks of a specific color after adjusting all colors at the same time. This may be disabled depending on the print application software. U “Streaks at Regular Intervals in the Print Result” on page 386 (Subs) Head Stitch Adjustment/ (Wh) Head Stitch Adjustment This is available when Nozzle Overlap is set to Customized. Reduces streaks that ap‐ pear at regular intervals in the feeding direction. Nozzle Overlap: Adjusts the thickness of the streaks so that they are no longer visible. Density:
If streaks remain even after adjusting the Nozzle Overlap, adjust the color density so that the streaks are less noticeable. This may be disabled depending on the print application software. U “Streaks at Regular Intervals in the Print Result” on page 386 Sharpen (Color Printing) Sets whether or not to make colors (CMYK) clearer when printing color plates. However, when set to Enable, white stripes may appear at the borders between colors. This function is not available for some print applications. Disable (default) Sharpening is not applied. Enable Sharpening is applied. Sharpen (White Printing) Sets whether or not to make outlines clearer when printing white plates.
This function is not available for some print applications. Disable (default) Sharpening is not applied. Enable Sharpening is applied.