2. System Function PLC Module The PLC module built in DVP10MC11T is identical to DVP series of PLC products. User could utilize the WPLSoft or ISPSoft software to edit the program, conduct the monitoring and make a connection with the left and right I/O extension and etc. The following is its functions. CPU specification: 32- bit CPU with the built-in instruction for 32-bit multiplication and division operation. In terms of program capacity, devices and instructions Compatible with SX2/ES2/EX2 MPU series of programs; program space: Max 16K Step Fast-speed execution of instruction ( Basic instruction:
0.35us ～ 1us, MOV instruction The application instruction library is identical to SX2/ ES2/EX2 series Max. 10000 D devices and 2112 latched areas. Communication devices COM1 (RS232) communication port COM2 (RS485) communication port Run/Stop switch can control the program to run or stop Extension module Max. 7 high-speed extension modules in the left side and 8 extension modules in the right are available The temperature modules like PT/TC supports the function of automatic adjustment of PID temperature Max. 240 input points and 240 output points for digital extension module.
Other functions Providing user with the special identification code, subprogram password protection and the limit of the time for inputting the wrong main password The built-in DELTA Q-Link communication protocol expedites to refresh HMI screen. For more details on the functions of PLC modules, please refer to the operating manuals (Programming) of DVP-ES2/EX2/SS2/SA2/SX2. MC Motion Control Module The MC motion control module in DVP10MC11T controls the servo drive to complete the high-speed, precise and high-efficiency control task via CANopen bus.
DVP10MC11T makes the complicate CANopen communication packaged and users do not need to know CANopen communication principle except to do the simple setting and edit the motion control program through CANopen Builder software to accomplish the complicate motion control. Therefore, it saves a lot of time for user to learn and shortens the lead time to develop products as well as speeds up the products to go to the market. The major functions of the motion control module of DVP10MC11T are listed below.
Supporting motion control instructions Logic instruction Single-axis motion instruction Multi-axis motion instruction Typical application instruction High-speed input points and output points Supporting 8 high-speed digital input points (I0~I7) with interruption function Supporting 4 high-speed digital output points (Q0~Q3) DVP-MC operating manual 2-5