2. System Function Supporting G codes Supporting standard G codes and supporting dynamic download of G codes; G codes are executed while being downloaded in order to accomplish the complicate objects processing. Capable to debug the G codes in the way of a single step or fixed point through CANopen Builder software CANopen Builder software provides the function of preview of G codes so that user could conveniently judge if the input G codes are correct or not. Supporting electronic Cam Supporting to call the specified cam curve through CANopen Builder software so as to edit the cam curve.
Supporting the application instructions for typical technology such as rotary cutting, flying shear. Users do not program the cam curve except to input the crucial technological parameters so that the cam curve will be reflected automatically in the inner of the instruction. And thus it will reduce a lot of work load for user to develop the project. Supporting E-gear Program capacity Providing max. 1M bytes for the program space, max. 12K Fbs program editable Max. 6000 rows of G codes storable. Max. 16 electronic cam curves editable and max. 2048 key points storable. 2.1.3. System Extension DVP10MC11T can be connected with extension modules on both its left side and right side.
The extension module connected to the left side of DVP10MC11T DVP10MC11T can be connected with CANopen, DeviceNet master and high-speed modules with analog quantity like DVP04AD-SL on its left side. Max. 7 high-speed modules are allowed to connect to the left side of DVP10MC11T. MC motion module is the first extension module of the left side of PLC module inside DVP10MC11T. And thus the first extension module of the left side of DVP10MC11T is the second extension module of PLC module.
For example, the output mapping area starts from D6282 if DVPCOPM-SL is connected to the left side of SV CPU and the output mapping area starts from D6782 if DVPCOPM-SL is connected to the left side of DVP10MC11T. DVP10MC S/S I0 I1 I2 I3 I4 I5 I6 I7 DeviceNet/CANopen master and the high-speed AIAO modules like DVP04AD-SL ...... UP ZP Q0 Q1 Q2 Q3 2-6 DVP-MC operating manual DVPDNET