SiteManager Installer 12. When clicking Save/Reboot you should get the following page (if not, you can try to click Back to the first screen, and click Next again until the Save/Reboot screen) appears. 13. If the SiteManager has received a DHCP assigned IP address, and ei- ther port 11444, 443 or 80 are allowed Internet access with SSL/TLS encryption by the network firewall, the SiteManager will now connect to the GateManager. Check the leaflet enclosed with your SiteManager for the LED signaling of “GateManager Connected”. If you are connecting via a 3G/GPRS modem connected to the Uplink2 USB port, the same LED status signaling will apply.
You do not need to do more local to the SiteManager. In reality you could now ship the SiteManager to a new site. Once the Ethernet Uplink1 port is connected at the new site, or the Up- link2 port has connected to the WiFi access point or broadband provider, the SiteManager will receive a new DHCP address, and attempt con- necting to the GateManager over the Internet. Secomea GateManager5 BASIC Guide Page 11 of 26