LinkManager User 35. In this example we have chosen a Siemens S300 PLC and the Device Type should subsequently be “Siemens / Ethernet”. Type an appropriate Device Name , and enter the IP address of the de- vice. 36. Click Save and click the Refresh Button, until you see the agent go IDLE : Hint: If it does not go idle, it means the SiteManager does not get a response from the device, and you should check the configured IP addresses and Ethernet wiring again. 37. Locate the browser window with the LinkManager. Click Refresh in the top menu, and you will now notice a “+” sign that will expand the SiteManager: Secomea GateManager5 BASIC Guide Page 21 of 26