SiteManager Installer 2. ROLE: SiteManager Installer You should have received a new un-configured SiteManager unit. UPLINK2 (requires an installed USB Wifi adapter or UPLINK2 Broadband modem) UPLINK1 UPLINK1 DEV DEV 2.1. Configure GateManager settings using the Appliance Launcher Hint: The steps in this section can actually be performed before sending the SiteManager to its final destination. 1. Download and install the Secomea Appliance Launcher from this loca- tion: http://info.secomea.com/appliance-launcher 2. Use a standard Ethernet cable to connect the SiteManager’s Ethernet Uplink/Uplink1 port to your local network.
(Alternatively you can connect directly your PC LAN port to the SiteManager’s Uplink port using an Ethernet cable. Both standard and cross-wired cables will work) 3. Connect power wires to the SiteManager screw terminals according to the leaflet included in the SiteManager package. 4. Power on the SiteManager, and wait about 30 seconds. Secomea GateManager5 BASIC Guide Page 6 of 26