SiteManager Installer 7. Click Next to enter the WAN/UPLINK page. Since we assume the SiteManager to be connected to your corporate network, you can leave the setting to DHCP, and it will automatically get an IP address and a default gateway from your corporate DHCP server. 8. Click Next to enter the WAN2/UPLINK2 page. This is only used for con- figuring a broadband or WiFi Uplink. Hint: If you already now have decided to use the 3G/GPRS option, you should just enter the Pin code of the SIM card here. Note that you can always enter this information via the SiteManager web GUI later. Secomea GateManager5 BASIC Guide Page 8 of 26