HP — Transfer block

Step 7: Transfer A positive bias is applied to the transfer charging roller, which is directly opposite the photosensitive drum. As the ETB passes the transfer charging roller, it picks up a positive charge. The negatively charged toner on the photosensitive drum is transferred to the positively charged paper. Figure 5-24 illustrates this step. This process is repeated for each color as the ETB carries the paper from the bottom cartridge to the top (C, Y, M, K). In four-color printing, as four colors of toner are piled up on the paper, the holding force of the toner weakens as the transfer process progresses.

To counteract this effect, the DC controller increases the positive DC bias applied to the transfer charging roller for each successive color. Figure 5-24 Toner transfer Step 8: Separation The paper’s elasticity causes it to separate from the ETB as the ETB reaches the top of its path. Figure 5-25 illustrates this step. Figure 5-25 Separation C9660-90901 Chapter 5 Theory of operation 117