Calibration and cleaning The printer automatically calibrates and cleans itself at various times to maintain the highest level of print quality. You can also force the printer to calibrate by choosing CALIBRATE NOW from the Print Quality menu. See “Calibrate Now” on page 294. While the printer is calibrating or cleaning, it will pause printing. For most calibrations and cleanings, the printer will not interrupt a print job, but will wait for the job to complete before calibrating or cleaning. Table 5-4 shows when the printer calibrates, the duration of the calibration, and the type of calibration that occurs. Table 5-5 shows when the printer cleans and the duration of the cleaning.
The sections that follow discuss calibration and cleaning in more detail. Table 5-4 Calibration timing and duration Table 5-5 Cleaning timing and duration C9660-90901 Chapter 5 Theory of operation 119 Calibration occurrence Duration Type of calibration When you turn the printer on. 75 seconds for calibration, but because of other initialization activities, the printer takes a total of 2 minutes to be ready for printing DMAX, DHALF When you install one or more print cartridges that have not previously been installed in the printer. 150 seconds (2 minutes, 30 seconds) DMAX, DHALF, color plane registration (CPR) After 50 pages have printed since installing a print cartridge.
The printer will finish printing the current job before calibrating. 75 seconds DMAX, DHALF After 1000 pages have printed since the last calibration. The printer will finish printing the current job before calibrating. 75 seconds DMAX, DHALF After 8 hours since the last calibration, but not while the printer is in PowerSave mode. Typically, this calibration occurs on the first job or control panel interaction after an overnight idle period. 75 seconds DMAX, DHALF When you request calibration from the control panel (Calibrate Now).
280 seconds (4 minutes, 40 seconds) DMAX, DHALF, CPR, drum phase Cleaning occurrence Duration Type of cleaning When the printer continuously prints (with no idle period or spin down) for 51 pages. either 5 seconds or 21 seconds (5 seconds is the most common) primary and toner charging rollers At intervals of 90 and 140 pages. The printer will finish printing the current job before cleaning. 16 seconds ETB