Color plane registration calibration The diameter of the rollers in individual print cartridges or ETB units varies from one to another. For this reason, whenever a new print cartridge or ETB unit is installed, the printer must adjust the rotational speed of the rollers in order to ensure good color plane registration. Color misregistration occurs when the individual colors do not print directly on top of one another, causing poor print quality. This adjustment consists of two steps: 1 Direct calibration . The DC controller uses the color registration detection unit to measure the color registration range directly and calibrate the color registration. 2 Indirect calibration .
The DC controller monitors the rotational speed of each feed roller and controls the speed to prevent color misregistration. Figure 5-30 illustrates this process. Figure 5-30 Color registration calibration Drum phase calibration The drum phase calibration aligns all four cartridge motors and their drive gears. 122 Image formation system C9660-90901