HP — Pickup/feed unit

Pickup/feed unit At the bottom of the paper path, the pickup unit picks individual pieces of paper from the trays. Then the ETB carries the paper to the top of the paper path. The sequence of events is as follows: 1 The formatter sends a print command to the DC controller, which rotates the pickup motor, the drum motors, the ETB motor, and the fuser motor. 2 The cassette feed roller and registration roller rotate as the pickup motor starts to rotate. 3 Paper is picked from the cassette or multi-purpose tray. A separation claw in the cassette prevents picking multiple sheets of paper. A separation pad in the multi-purpose tray prevents multiple sheets from feeding.

4 The registration shutter corrects any skew in the paper, and the paper is fed at a specified speed, according to the size and type of the paper. 5 As the ETB carries the paper past each print cartridge, toner is transferred onto the paper. Cassette detection and cassette paper size detection The printer can sense whether the cassette (Tray 2) is installed correctly, and it can sense the size of the paper in the cassette. Paper size detection switches at the back of the cassette send this information to the DC controller. The DC controller is able to determine which size is loaded by reading the state of the various switches according to the Table 5-6.

Figure 5-34 shows how the switches are stacked. Table 5-6 Cassette paper size detection Although the cassette determines paper size by reading the switches, it is possible that the user can select a different size than what is loaded, creating an error in paper size detection. The paper leading edge sensor detects when the leading edge and the trailing edge of a sheet of paper pass it. By measuring the time between the leading edge and trailing edge passing, the sensor can determine the actual size of the paper. If this measured size differs from the size specified by the formatter or the switch combination, the DC controller determines there is a mis-match.

The current sheet of paper is ejected from the printer, and the printer stops. Figure 5-34 Cassette paper size detection switches 128 Pickup/feed system C9660-90901 Paper size Paper size detection switch SW1 SW2 SW3 A4 on off off B5 on on off A5 on off on Letter off on on Legal off off on Executive off on off Custom on on on No cassette off off off