HP — Pickup/feed unit

Overhead transparency detection In order to prevent print quality problems, the printer prints on overhead transparencies (OHT) at a slower speed than on plain paper. The printer has a sensor above the paper leading edge sensor that detects an OHT and signals the DC controller to slow the motors accordingly. The OHT sensor uses a light transmitter and receiver to detect the presence of plain paper. When plain paper passes through the sensor, the light is blocked, and the OHT signal changes from low to high. Consequently, when the signal is not blocked, but paper is detected by the paper leading edge sensor, the DC controller determines the media to be an OHT.

Figure 5-35 illustrates this process. Figure 5-35 Overhead transparency detection C9660-90901 Chapter 5 Theory of operation 129