HP — Pickup/feed unit

Small-size paper detection Because the printer’s overhead transparency detection sensor is installed at the end of the feed path, small-size paper that does not pass the edge of the feed path can be mistaken for an OHT. To avoid this problem, the printer has a lever in front of the OHT detection sensor to distinguish small-sized paper. Small-size paper is too narrow to trip the lever. When the lever is tripped, the flag attached to the lever momentarilly blocks light from reaching the OHT detection sensor, indicating that the media is full width.

The DC controller determines whether the media is an OHT or a sheet of paper based on whether the OHT sensor remains shaded from light as the media passes through. If the lever is not triggered, the DC controller determines the media to be small-size paper. Figure 5-36 illustrates this process. Figure 5-36 Small-size paper detection 130 Pickup/feed system C9660-90901