Feed speed control The type of media in the paper path dictates the speed at which it is fed. The DC controller can change the feed speed according to type of media. Table 5-7 shows the relationship between media type and feed speed. Table 5-7 Feed speed according to media The DC controller determines a media mismatch, ejects the media, and stops the printer in the following situations:
G when OHT is detected and the printer is set to either thick paper or gloss mode G when plain paper is detected and the printer is set to OHT mode However, if the printer is set to plain paper mode and OHT is detected, the DC controller will automatically switch the printer to OHT mode, and printing continues normally.
C9660-90901 Chapter 5 Theory of operation 131 Feed mode Media type Print mode Feed speed Normal mode G plain paper full color normal monochrome OHT mode G overhead transparency full color 1/4 speed monochrome 1/2 speed Thick 1 mode G thick paper full color 1/2 speed monochrome Thick 2 mode G thick paper full color 1/2 speed monochrome Gloss 1 mode G glossy paper full color 1/3 speed monochrome Gloss 2 mode G glossy paper full color 1/3 speed monochrome Gloss film mode G glossy film full color 1/3 speed monochrome Envelope mode G envelope full color normal monochrome Thick paper mode G thick paper full color normal monochrome Label paper mode G adhesive labels full color 1/2 speed monochrome Auto mode G plain paper G OHT full color automatically adjusts for media monochrome