Cassette (Tray 2) paper pickup rollers To remove the paper pickup rollers 1 Remove the ETB and the print cartridges. 2 Remove the paper pickup unit. See page 156. 3 On the paper pickup unit, from the bottom, grasp the paper pickup rollers shown in callout 1, and firmly push down to remove them. 1 Figure 6-22 Removing the cassette pickup rollers Reinstallation tip When reinstalling the paper pickup rollers, be sure to fit the pins on the pickup roller into the holes on the pickup roller shaft. Figure 6-23 Replacing the cassette pickup rollers 158 Internal components (front) C9660-90901