Paper pickup drive unit To remove the paper pickup drive unit 1 Remove the paper pickup unit. See page 156. 2 On the bottom of the paper pickup unit, remove the screw holding the gear cover in place, and then remove the gear cover. 3 Unhook the spring from the gear, shown in callout 1. 4 Using a flat-bladed screwdriver, push down on the tab in the center of the gear to release it (callout 2), and then remove the gear. 5 Remove the three black screws shown in callout 3. 6 Disconnect the three connectors on the back of the paper pickup drive unit, and remove the unit. 3 2 1 Figure 6-24 Removing and replacing the paper pickup drive unit C9660-90901 Chapter 6 Removal and replacement 159