Multi-purpose tray pickup roller and separation pad To remove the multi-purpose tray pickup roller and separation pad 1 Remove Tray 2 from the printer, and remove any paper in the tray. 2 Rotate the two lock pins outward, shown in callout 1, and tilt the cassette cover forward. 3 Push the blue roller snap shown in callout 2 towards the back of the tray, and remove it. 4 Pull up on the multi-purpose tray pickup roller shown in callout 3, and remove it. 5 Push outward on the two tabs that hold the separation pad in place (callout 4). 6 Pull the separation pad forward to remove it (callout 5).
1 Figure 6-25 Removing and replacing the multi-purpose tray pickup roller and separation pad (1 of 2) 3 2 5 4 Figure 6-26 Removing and replacing the multi-purpose tray pickup roller and separation pad (2 of 2) Note Always replace the separation pad when you replace the multi-purpose tray pickup roller. 160 Internal components (front) C9660-90901