HP — Laser/scanner units

To remove the laser/scanner retaining bars 1 Remove the laser/scanner cover plate. See page 180. 2 Pull the cables for the four laser/scanner connectors free of the printer frame. 3 On the left side of the printer, remove the screw above the DC controller, shown in callout 1. 4 Push the top of the sheet-metal scanner retaining bar towards the laser/scanners (callout 2). 5 Rotate the bar down and carefully remove it from the printer. CAUTION The scanner retaining bars are under spring tension. Remove them carefully.

1 Figure 6-52 Removing and replacing the left side laser/scanner retaining bar, left side of printer (1 of 2) 2 Figure 6-53 Removing and replacing the left side laser/scanner retaining bar, rear of printer (2 of 2) 182 Internal components (rear) C9660-90901