6 On the top surface of the right side of the printer, remove the screw shown in callout 3. 7 On the right side of the printer, push the top of the sheet-metal scanner retaining bar in towards the laser/scanners (callout 4). 8 Rotate the bar down and carefully remove it from the printer. 3 Figure 6-54 Removing and replacing the right side laser/scanner retaining bar, right side of printer (1 of 2) 4 Figure 6-55 Removing and replacing the right side laser/scanner retaining bar, rear of printer (2 of 2) Reinstallation tip Reinstall the laser/scanner retaining bars in the same order you removed them: the left side and then the right side.
Feed the connector cables through the frame and reconnect the connectors to the DC controller. C9660-90901 Chapter 6 Removal and replacement 183