To remove the laser/scanner units 1 Remove the laser/scanner retaining bars. See page 182. 2 For the cyan laser/scanner unit, slide it to the left and then pull it out of the printer. 3 For the yellow, magenta, and black laser/scanner units, first unhook each unit from the white strap shown in callout 1. Then pull the laser/scanner units out of the printer. CAUTION When reinstalling the laser/scanner units, always reconnect the laser/scanner units to the strap. Failure to do so could cause the laser/scanners to become distorted, and the laser beam could become skewed, resulting in image defects. CAUTION The laser/scanner unit is not adjustable in the field. Be sure not to disassemble it.
1 Figure 6-56 Removing and replacing the laser/scanner units 184 Internal components (rear) C9660-90901