HP — Cartridge fan

Cartridge fan To remove the cartridge fan Note The cartridge fan is the vertical, front-most fan. 1 Remove the rear cover. See page 144. 2 Remove the top cover. See page 145. 3 Remove the rear top cover. See page 146. 4 Remove the left cover. See page 148. 5 Remove the DC controller shield. See page 155. 6 Disconnect the connector J1004 on the DC controller PCB. See page 304. 7 Unthread the cables from the guides shown in callout 1. 8 Remove the two screws shown in callout 2. 9 Remove the fan holder and fan from the printer (callout 3). 10 Remove the fan from the fan holder.

Reinstallation tip When reinstalling the cartridge fan, be sure that the arrow marked on the fan holder and the arrow marked on the fan are pointing in the same direction. 3 1 2 Figure 6-69 Removing and replacing the cartridge fan C9660-90901 Chapter 6 Removal and replacement 197