Formatter fan To remove the formatter fan Note The formatter fan is the horizontal, rear-most fan. 1 Remove the rear cover. See page 144. 2 Remove the top cover. See page 145. 3 Remove the rear top cover. See page 146. 4 Remove the left cover. See page 148. 5 Remove the DC controller shield. See page 155. 6 Remove the cartridge fan and holder. See page 197. 7 Disconnect the connector J1003 on the DC controller. See page 304. 8 Remove the two screws shown in callout 1. 9 Remove the fan holder and the fan from the printer. 10 Remove the fan from the fan holder.
Reinstallation tip When reinstalling the formatter fan, be sure that the arrow marked on the fan holder and the arrow marked on the fan are pointing in the same direction. 1 Figure 6-70 Removing and replacing the formatter fan 198 Internal components (top) C9660-90901