HP — Alphabetical printer messages

Table 7-2 Alphabetical printer messages (continued) 218 Printer error troubleshooting C9660-90901 Message Description Action ORDER SUPPLIES For status press More than one supply item is low and the SUPPLIES LOW setting is set to STOP. 1 Press to identify which supplies should be ordered. 2 Order the identified supplies. 3 Press twice to continue printing. Printing can continue until supplies reach end of life. 4 Supplies ordering information is also available from the embedded Web server.

ORDER TRANSFER KIT XXXX PAGES LEFT To continue press The number of pages remaining for the transfer unit has reached the low threshold and the SUPPLIES LOW setting in the SYSTEM SETUP submenu is set to STOP. 1 Order the transfer kit. 2 Printing can continue until the transfer unit reaches end of life. 3 Press for detailed information. 4 Press and to step through instructions. 5 Supplies ordering information is also available from the embedded Web server. ORDER TRANSFER KIT XXXX PAGES LEFT To enter menus press The transfer unit is near end of life. 1 Order an image transfer kit. 2 Printing can continue until the transfer unit reaches end of life. 3 Press for detailed information.

4 Press and to step through instructions. 5 Supplies ordering information is also available from the embedded Web server. OUTPUT BIN FULL Remove all paper from bin The output bin is full and must be emptied for printing to continue. Remove media from the output bin. Performing PAPER PATH TEST The printer is performing a Paper Path test. No action is necessary; however, the data is useful to help troubleshoot paper jams. Printing... PQ TROUBLESHOOTING The printer is generating the print quality troubleshooting pages. The printer will return to the Ready state when the pages are printed. Follow the instructions on the printed pages. Printing...

REGISTRATION PAGE The printer is generating the registration page. The printer will return to the SET REGISTRATION menu when the page is completed. Follow the instructions on the printed pages. Processing duplex job Do not grab paper until job completes Paper temporarily comes into the output bin while printing a duplex job. Do not attempt to remove the pages until the job is complete. Do not grab paper as it temporarily comes into the output bin. The message will disappear when the job is finished. RAM DISK DEVICE FAILURE alternates with Ready For menus press A device failure has occurred on the specified drive. Turn the printer off and then back on to remove this message from the display.