Table 7-2 Alphabetical printer messages (continued) C9660-90901 Chapter 7 Troubleshooting 221 Message Description Action TRAY XX CONTAINS UNKNOWN MEDIA The media type in the specified tray cannot be determined. 1 To change media type, press . Use and to highlight the type, then press to select. 2 To change the media size to Letter, A4, Executive, B5 JIS, A5, or Legal, leave the tray switch in the STANDARD position. 3 To change the media size to other sizes, move the tray switch to CUSTOM, adjust the paper guides against the paper, and close the tray. 4 Use and to highlight the media size, then press to select.
TRAY XX EMPTY alternates with Ready For menus press The specified tray is empty and needs to be filled but the current job does not need this tray to print correctly. Refill the tray at a convenient time. TRAY XX OPEN For help press alternates with Ready For menus press The specified tray is open or not closed completely. Close the tray. TRAY XX SIZE= For help press alternates with TRAY XX SIZE= To change, move switch in tray XX A non-detectable media size was selected from the menu and the tray switch is set to STANDARD. The size selected from the menu does not match the size detected by the tray. Size detection occurs when the tray switch is set in the STANDARD position.
1 Adjust the side and rear media guides against the paper. 2 If the media used is Letter, A4, Executive, B5 JIS, A5, or Legal sized, the tray switch should be set to STANDARD. Set the tray switch to CUSTOM for all other media sizes. The tray switch must be set before the size can be selected from the control panel. 3 Reset the paper size in the paper handling menu. TRAY XX Size detected by tray alternates with TRAY XX To change type press The printer is reporting the current configuration of tray XX. The tray switch is in the STANDARD position. 1 To change media type, press . Use and to highlight the type, then press to select.
2 To change the media size to Letter, A4, Executive, B5 JIS, A5, or Legal, leave the tray switch in the STANDARD position. 3 To change the media size to other sizes, move the tray switch to CUSTOM, adjust the paper guides against the paper, and close the tray. 4 Use and to highlight the media size, then press to select.