Table 7-2 Alphabetical printer messages (continued) Note Not all messages are described in the tables; those messages that are not listed are self-explanatory. 222 Printer error troubleshooting C9660-90901 Message Description Action TRAY XX Size specified by user alternates with TRAY XX To change type press The printer is reporting the current configuration of tray XX. The tray switch is in the CUSTOM position. 1 To change media type, press . Use and to highlight the type, then press to select. 2 To change the media size to Letter, A4, Executive, B5 JIS, A5, or Legal, set the tray switch to the STANDARD position and adjust the media guides to the correct positions.
3 To change the media size to other sizes, leave the tray switch in the CUSTOM position, adjust the media guides against the media, and close the tray. 4 Select the paper handling menu from the control panel. Configure the size for the tray. TYPE MISMATCH TRAY XX= alternates with Ready To enter menus press This warning appears after the printer has detected an overhead transparency in the paper path when the tray is configured for another type, resulting in a 41.5 Unexpected Type in Tray XX error. The user did not reconfigure the tray after the error message appeared, so the printer determines that the type of media is not what the tray is configured to hold. To change media type, press .
Use and to highlight the type, then press to select. Unable to store job A job cannot be stored because of a memory, disk, or configuration problem. Install additional memory in the printer, or install a disk drive into the printer. If a disk drive is installed, delete previously stored print jobs. USE INSTEAD? TRAY 2: TRAY 3: The printer is offering a selection of alternate media to use for the print job. Highlight the media with and . Press to select a choice.