Dirt on back of paper Table 7-24 Causes for dirt on the back of the paper Dirt on front of paper Table 7-25 Causes for dirt on the front of the paper Vertical lines Table 7-26 Causes for vertical lines 256 Image defects C9660-90901 Cause Solution Rollers are dirty. See Table 7-36 on page 260 for information on identifying the roller(s) that might be dirty. Clean the indicated roller. If the roller is still dirty after cleaning, replace the appropriate roller, cartridge, or assembly. Pickup roller is dirty. Clean the roller. If the roller is still dirty after cleaning, replace the pickup roller assembly. Poor contact in the attaching bias contacts between the ETB and the high-voltage PCB.
Clean the contacts. Replace them if they are still dirty or are damaged. High-voltage PCB is defective. Replace the high-voltage PCB. DC controller PCB is defective. Replace the DC controller PCB. Calibrate the printer after replacing the DC controller. See “Calibrate Now” on page 294. Cause Solution Rollers are dirty. See Table 7-36 on page 260 for information on identifying the roller(s) that might be dirty. Clean the indicated roller. If the roller is still dirty after cleaning, replace the appropriate roller, cartridge, or assembly. Pickup roller is dirty. Clean the roller. If is still dirty after cleaning, replace the pickup roller assembly.
Poor contact in the attaching bias contacts between the ETB and the high-voltage PCB. Clean the contacts. Replace them if they are still dirty or are damaged. High-voltage PCB is defective. Replace the high-voltage PCB. DC controller PCB is defective. Replace the DC controller PCB. Calibrate the printer after replacing the DC controller. See “Calibrate Now” on page 294. Cause Solution Photosensitive drum has grooves going around the circumference. Replace the cartridge for the color of the vertical lines. Fuser sleeve has grooves around the circumference. Replace the fuser.