HP — Image defects

White vertical lines Table 7-27 Causes for white vertical lines Horizontal lines Table 7-28 Causes for horizontal lines White horizontal lines Table 7-29 Causes for white horizontal lines Missing color Table 7-30 Causes for a missing color C9660-90901 Chapter 7 Troubleshooting 257 Cause Solution Developing cylinder has grooves going around the circumference. Replace the print cartridge for the color in which the white lines appear. Photosensitive drum has grooves going around the circumference. Replace the print cartridge for the color in which the white lines appear. Laser is blocked by a foreign substance.

Inspect the laser source for the affected color, and remove any debris that might be blocking it. Mirror in the laser/scanner unit is dirty. Replace the laser/scanner for the color in which the white lines appear. Calibrate the printer after replacing the laser/scanner. See “Calibrate Now” on page 294. The fuser sleeve has vertical scars. (All colors are affected.) Replace the fuser. Cause Solution Photosensitive drum has scars running from end to end. Replace the print cartridge for the affected color. The fuser sleeve has scars running from end to end. Replace the fuser. Cause Solution Photosensitive drum has scars running from end to end.

Replace the print cartridge for the affected color. ETB belt has horizontal scars. Replace the ETB. Calibrate the printer after replacing the ETB. See “Calibrate Now” on page 294. Cause Solution Poor contact in the developing bias contacts of the high-voltage PCB and the print cartridge. Clean the contacts. If they are still dirty after cleaning, or if they are damaged, replace the print cartridge or the high-voltage contacts. Replace the high-voltage PCB. Primary charging roller is defective. Replace the print cartridge for the missing color. Laser/scanner unit is defective. Replace the laser/scanner for the missing color. Calibrate the printer after replacing the laser/scanner.

See “Calibrate Now” on page 294. High-voltage PCB is defective. Replace the high-voltage PCB. DC controller PCB is defective. Replace the DC controller PCB. Calibrate the printer after replacing the DC controller. See “Calibrate Now” on page 294.