HP — Accessing the Service menu

Service menu Accessing the Service menu The Service menu is PIN protected for added security. Only authorized service people have access to the Service menu. When you select SERVICE from the list of menus, you are prompted to enter your 8-digit PIN number. The PIN for this printer is 04460002. 1 Press or until the first digit of the PIN is displayed. 2 Press to save the digit. The display will replace the digit with an asterisk. 3 Repeat steps 1 and 2 until all eight digits are entered. 4 Press at any time to move to the previous digit. Clear event log This item allows you to clear the printer’s internal event log.

Total page count The page count stored in NVRAM and printed on the configuration page represents the number of pages that the formatter has formatted (not including engine test prints). If you install a new formatter when repairing a printer, use this menu item to reset the page count to the previous value. In this way, the page count reflects the number of pages printed by the engine rather than starting over for the new formatter. The page count is broken into two categories: total mono pages and total color pages. Transfer kit count This item allows you to reset the transfer unit count if the value is lost, such as when you replace the formatter.

This value is initially set to zero at the factory. Enter a value up to 120,000. This value is automatically reset to zero when a customer installs a new transfer kit and sets NEW TRANSFER KIT to YES in the Resets menu. Fuser kit count This item allows you to reset the fuser count if the value is lost, such as when you replace the formatter. This value is initially set to zero at the factory. Enter a value up to 150,000. This value is automatically reset to zero when a customer installs a new transfer kit and sets NEW FUSER KIT to YES in the Resets menu. Serial number If you replace the formatter, use this item to reset the serial number of the printer.

C9660-90901 Chapter 7 Troubleshooting 295